Product
HLM is proud to offer a wide range of high-quality, aesthetically pleasing products that suit your budget.
In addition, we also provide solution packages that are fully tailored to your warehouse shelving installation needs.
VI
Essential Finishing Component for Roof and Wall Systems
Metal sheet flashings are custom-formed steel accessories designed to seal joints and intersections between roof, wall cladding, and structural components in pre-engineered steel buildings.
– Hoa Long Mechanical
In addition to aesthetic enhancement, sheet flashings provide:
Prevent rainwater ingress into the building interior
Seal panel joints across pre-engineered steel cladding sheets
Protect roof and wall edges from wind uplift and dust intrusion
Enhance the overall finish of the roof system
In pre-engineered steel buildings, metal flashings are typically fabricated from galvanized steel or prepainted steel sheets matching the roof and wall panels.
What is Metal Sheet Flashing?
Metal sheet flashings are custom-bent steel profiles installed at transitions or edges of roof and wall systems. Common installation locations include:
- Roof edges
- Roof ridge (apex)
- Wall corners
- Wall edges / terminations
- Roof-to-wall junctions (Wall-roof transitions)
This ensures superior waterproofing performance and provides a more refined aesthetic finish for the building.
Common Types of Metal Sheet Flashings in Pre-Engineered Steel Buildings
Eave Flashing (Eave Trim)
Eave flashing is installed along the lower roof edge at the transition between the roof panels and the wall cladding or gutter system.
Functions:
-
Direct rainwater run-off into the gutter system
-
Conceal and protect roof sheet edges
-
Prevent water backflow and interior moisture penetration
This is a critical flashing type within the roof drainage system.
Barge Flashing (Rake Flashing)
This flashing is installed along the roof edge at the gable ends of the building. Functions:
- Cover roof sheet edges
- Prevent wind uplift at roof edges
- Protect purlin components
Barge flashings enhance both the durability and appearance of the roof system.
Ridge Flashing (Ridge Cap)
Ridge flashing is installed along the apex of gable roof structures. Functions:
- Cover the apex joint between roof sheets
- Prevent rain penetration and wind draft
- Provide a clean aesthetic finish for the roof
Ridge flashings are typically manufactured in V-shaped or U-shaped profiles.
Corner Flashing (Corner Trim)
Corner flashing is installed at the intersection of two exterior wall surfaces. Functions:
- Cover wall cladding joints
- Provide waterproofing at wall corners
- Reinforce structural rigidity at corner connections
Corner flashings ensure a seamless, polished, and unified architectural appearance.
Base Flashing (Base Trim)
Base flashing is installed at the junction between wall cladding and the concrete slab or base wall. Functions:
- Prevent wind-driven rain penetration at the wall base
- Conceal wall cladding sheet edges
- Protect the wall base area from erosion and moisture
This type of flashing is commonly used in industrial plants and warehouses.
Key Considerations for Metal Sheet Flashing Design and Installation
To ensure optimal performance and longevity, metal flashings must:
- Be custom-designed to precise dimensions
- Be installed in the correct orientation and location
- Be securely fastened to roof or wall panels
Additionally, flashing lap joints must be properly sealed to prevent water leakage
Materials Used for Metal Sheet Flashing
Metal flashings are typically manufactured from:
- Galvanized steel sheets
- Corrosion-resistant alloy-coated steel sheets
- Color-coated steel panels matching the roof and wall sheets
Common thickness range: 0.4 mm – 0.6 mm, subject to specific project design requirements
FAQ
Is metal sheet flashing mandatory for pre-engineered buildings?
In pre-engineered steel buildings, metal flashings are essential components that ensure effective waterproofing and structural finishing.
Does metal flashing need to match the roof color?
Typically, metal flashings are manufactured in colors matching the roof or wall cladding to ensure aesthetic consistency.
Can metal flashings be custom-fabricated according to specific designs?
Yes. Metal flashings can be custom-fabricated to precise architectural and engineering drawings for each project.
